Machine cleaning is an important aspect of machine maintenance. Operators must develop clean operation habits careful working attitude, do a good job of regular cleaning. In this way, only the service life of the machine can be improved, but also the hidden danger of accidents the wear of the machine can be found in time, the machine can be repaired in time. The specific work includes:
1. Often erase the paper powder the paper feeding table.
2. Plate cylinder, rubber cylinder embossing cylinder are the heart of the printing machine. The shoulder iron of plate rubber cylinder shall be kept clean.
3. Do leave ink in the cot, do make the ink skinned on the cot. if it is used for a long time, remove the cot to avoid extrusion deformation.
4. After printing, rubber roller embossing roller must be cleaned.
5. Dust oil contamination at the electrical box shall be cleaned in time to prevent paper wool entering into the relay contactor switch to cause power failure.
6. When cleaning the engine, always check whether the oil circuit is smooth, whether there is a place for daily forgetting to refuel, whether the oil pipe is blocked.
7. It is also necessary to check whether the fasteners are loose damaged.
8. If the machine does run for a long time, cover it with a dust cover to avoid the invasion of lime sand.